Initial release: Driver Manager KernelSU module v1.0.0

Manage GPU, WiFi, Bluetooth, SDR, and game controller drivers.
Supports PowerVR mode switching, BCM4390/Nexmon WiFi modes,
RTL-SDR/HackRF/Airspy with DVB-T/SDR mode toggle, Xbox/PS5/
Switch Pro controllers, and QCA Bluetooth pentest mode.
WebUI control panel for KernelSU manager.

customize.sh

@@ -0,0 +1,85 @@
+#!/system/bin/sh
+# Driver Manager - Installation Script
+
+SKIPUNZIP=0
+
+ui_print "================================================"
+ui_print " Driver Manager v1.0.0"
+ui_print "================================================"
+ui_print ""
+
+DEVICE=$(getprop ro.product.device)
+MODEL=$(getprop ro.product.model)
+SOC=$(getprop ro.soc.model)
+PLATFORM=$(getprop ro.board.platform)
+GPU=$(getprop ro.hardware.egl)
+API=$(getprop ro.build.version.sdk)
+
+ui_print "- Device: $MODEL ($DEVICE)"
+ui_print "- SoC: $SOC ($PLATFORM)"
+ui_print "- GPU: $GPU"
+ui_print "- API: $API"
+ui_print ""
+
+# Detect WiFi chip
+WIFI_MOD=$(ls /sys/module/ 2>/dev/null | grep -iE "^bcmdhd" | head -1)
+ui_print "- WiFi module: ${WIFI_MOD:-unknown}"
+
+# Detect Bluetooth
+BT_MOD=$(ls /sys/module/ 2>/dev/null | grep -iE "^(btqca|btusb|btbcm|hci)" | head -1)
+ui_print "- BT module: ${BT_MOD:-unknown}"
+
+ui_print ""
+
+# Create default config
+mkdir -p "$MODPATH/config"
+echo "performance" > "$MODPATH/config/gpu_mode"
+echo "standard" > "$MODPATH/config/wifi_mode"
+echo "standard" > "$MODPATH/config/bt_mode"
+echo "sdr" > "$MODPATH/config/sdr_mode"
+echo "auto" > "$MODPATH/config/gamepad_mode"
+echo "off" > "$MODPATH/config/decoder_mode"
+echo "100.0M" > "$MODPATH/config/fm_freq"
+echo "24M:1800M" > "$MODPATH/config/spectrum_range"
+
+# Create modules directory for .ko files
+mkdir -p "$MODPATH/modules"
+mkdir -p "$MODPATH/firmware"
+
+ui_print "- Default config written"
+ui_print "- Kernel module dir: modules/"
+ui_print "- Firmware dir: firmware/"
+ui_print ""
+
+# Check for kernel module support
+if [ -d "/proc/modules" ]; then
+    ui_print "- Kernel module loading: supported"
+else
+    ui_print "! Kernel module loading: not detected"
+    ui_print "! SDR and controller .ko files may not load"
+fi
+
+# Check USB OTG
+if [ -d "/sys/class/udc" ]; then
+    ui_print "- USB OTG: supported"
+else
+    ui_print "! USB OTG: not detected"
+fi
+
+ui_print ""
+ui_print "- Setting permissions..."
+
+set_perm_recursive $MODPATH 0 0 0755 0644
+set_perm $MODPATH/post-fs-data.sh 0 0 0755
+set_perm $MODPATH/service.sh 0 0 0755
+set_perm_recursive $MODPATH/config 0 0 0755 0644
+set_perm_recursive $MODPATH/modules 0 0 0755 0644
+set_perm_recursive $MODPATH/firmware 0 0 0755 0644
+set_perm_recursive $MODPATH/system/etc 0 0 0755 0644
+
+ui_print ""
+ui_print "- Installation complete!"
+ui_print "- Use WebUI in KernelSU to switch driver modes"
+ui_print "- Place .ko modules in modules/ dir"
+ui_print "- Place firmware in firmware/ dir"
+ui_print ""