b81de56601
Driver spoof: mount namespace isolation keeps stock files visible to verification (dm-verity, Play Integrity, hash checks) while custom drivers load into target processes (surfaceflinger, wpa_supplicant, bluetooth). SELinux context, timestamps, perms, ownership all cloned from stock. Per-process or global modes. Configurable driver map for GPU, WiFi firmware, BT firmware. Stealth: process name masking (rtl_tcp->mediastream, etc), non-stock prop removal, MAC randomization (WiFi+BT), USB device permission tightening, log purging, logcat suppression. Full mode combines all stealth features. WebUI panels for both spoof and stealth control.
481 lines
18 KiB
Bash
Executable File
481 lines
18 KiB
Bash
Executable File
#!/system/bin/sh
|
|
# Driver Manager - late service
|
|
# Manages GPU, WiFi, Bluetooth, SDR, and game controller drivers
|
|
#
|
|
# Native kernel support confirmed on Pixel 10 Pro Fold (rango):
|
|
# GPU: pvrsrvkm (PowerVR DXT-48-1536) — built-in
|
|
# WiFi: bcmdhd4390 (Broadcom BCM4390) — built-in
|
|
# Bluetooth: btqca, btbcm, bluetooth, rfcomm, hidp — built-in
|
|
# Controllers: xpad, hid-playstation, hid-nintendo, hid-sony,
|
|
# hid-microsoft, hid-logitech, hid-steam, wacom — all built-in
|
|
# USB: usbhid, usb_storage, ftdi_sio, cdc_acm, snd_usb_audio — built-in
|
|
# SDR: No kernel DVB/SDR modules — all SDR uses userspace USB via OTG
|
|
# (librtlsdr, libhackrf, libairspy talk directly to USB device)
|
|
|
|
MODDIR=${0%/*}
|
|
LOGFILE="$MODDIR/driver-manager.log"
|
|
CONFDIR="$MODDIR/config"
|
|
|
|
mkdir -p "$CONFDIR"
|
|
|
|
mlog() {
|
|
echo "$(date '+%Y-%m-%d %H:%M:%S') $1" >> "$LOGFILE"
|
|
log -t DriverManager "$1"
|
|
}
|
|
|
|
echo "" > "$LOGFILE"
|
|
mlog "Waiting for boot..."
|
|
|
|
while [ "$(getprop sys.boot_completed)" != "1" ]; do
|
|
sleep 1
|
|
done
|
|
sleep 3
|
|
|
|
DEVICE=$(getprop ro.product.device)
|
|
SOC=$(getprop ro.soc.model)
|
|
PLATFORM=$(getprop ro.board.platform)
|
|
API=$(getprop ro.build.version.sdk)
|
|
GPU=$(getprop ro.hardware.egl)
|
|
|
|
mlog "Boot complete. Device=$DEVICE SoC=$SOC Platform=$PLATFORM API=$API GPU=$GPU"
|
|
|
|
# ============================================================
|
|
# GPU — PowerVR DXT-48-1536 (pvrsrvkm, native)
|
|
# ============================================================
|
|
# Vulkan 1.4, OpenGL ES 3.x, OpenCL 3.0
|
|
# Driver: /vendor/lib64/egl/libGLES_powervr.so
|
|
# Firmware: /vendor/firmware/powervr/
|
|
|
|
GPU_MODE=$(cat "$CONFDIR/gpu_mode" 2>/dev/null || echo "performance")
|
|
|
|
case "$GPU_MODE" in
|
|
performance)
|
|
resetprop debug.renderengine.backend skiavk
|
|
resetprop debug.hwui.renderer skiagl
|
|
resetprop debug.hwui.use_hint_manager true
|
|
# Request max GPU frequency via thermal hint
|
|
echo "max" > /sys/class/powervr/frequency_hint 2>/dev/null
|
|
mlog "GPU: performance (Vulkan render, max freq)"
|
|
;;
|
|
balanced)
|
|
resetprop debug.renderengine.backend skiaglthreaded
|
|
resetprop debug.hwui.renderer skiagl
|
|
echo "auto" > /sys/class/powervr/frequency_hint 2>/dev/null
|
|
mlog "GPU: balanced"
|
|
;;
|
|
powersave)
|
|
resetprop debug.renderengine.backend skiagl
|
|
resetprop debug.hwui.renderer skiagl
|
|
echo "min" > /sys/class/powervr/frequency_hint 2>/dev/null
|
|
mlog "GPU: powersave"
|
|
;;
|
|
compute)
|
|
# OpenCL compute priority — CUDA alternative
|
|
resetprop vendor.powervr.opencl.allowfp16 1
|
|
resetprop vendor.powervr.opencl.profiling 1
|
|
echo "max" > /sys/class/powervr/frequency_hint 2>/dev/null
|
|
mlog "GPU: compute (OpenCL 3.0, FP16 enabled)"
|
|
;;
|
|
esac
|
|
|
|
# Updatable GPU driver — Pixel 10 supports Game Update Pack
|
|
# v25.1+ brings Vulkan 1.4 and major perf improvements over v24.3
|
|
resetprop ro.gfx.driver.1 com.google.pixel.powervr.gfxdriver
|
|
mlog "GPU driver: PowerVR DXT-48-1536 (pvrsrvkm native)"
|
|
|
|
# ============================================================
|
|
# WIFI — BCM4390 (bcmdhd4390, native)
|
|
# ============================================================
|
|
# Capabilities: Wi-Fi 7, WFD R2, P2P, VHT, DFS
|
|
# Firmware: /vendor/firmware/fw_bcmdhd4390.bin
|
|
|
|
WIFI_MODE=$(cat "$CONFDIR/wifi_mode" 2>/dev/null || echo "standard")
|
|
|
|
case "$WIFI_MODE" in
|
|
standard)
|
|
resetprop wifi.direct.interface p2p-dev-wlan0
|
|
resetprop wifi.direct.go_intent 15
|
|
mlog "WiFi: standard (P2P enabled)"
|
|
;;
|
|
monitor)
|
|
# BCM4390 monitor mode via nexmon firmware patch
|
|
if [ -f "$MODDIR/firmware/fw_bcm4390_monitor.bin" ]; then
|
|
# Back up stock firmware on first use
|
|
if [ ! -f "$MODDIR/firmware/fw_bcm4390_stock.bin" ]; then
|
|
cp /vendor/firmware/fw_bcmdhd4390.bin "$MODDIR/firmware/fw_bcm4390_stock.bin"
|
|
mlog "WiFi: backed up stock firmware"
|
|
fi
|
|
cp "$MODDIR/firmware/fw_bcm4390_monitor.bin" /vendor/firmware/fw_bcmdhd4390.bin
|
|
# Reload driver
|
|
echo 1 > /sys/module/bcmdhd4390/parameters/reload 2>/dev/null
|
|
mlog "WiFi: monitor mode (nexmon firmware loaded)"
|
|
else
|
|
mlog "WiFi: monitor mode requested — nexmon firmware not found"
|
|
mlog "WiFi: see BUILDING_MODULES.md for instructions"
|
|
fi
|
|
;;
|
|
injection)
|
|
if [ -f "$MODDIR/firmware/fw_bcm4390_injection.bin" ]; then
|
|
if [ ! -f "$MODDIR/firmware/fw_bcm4390_stock.bin" ]; then
|
|
cp /vendor/firmware/fw_bcmdhd4390.bin "$MODDIR/firmware/fw_bcm4390_stock.bin"
|
|
fi
|
|
cp "$MODDIR/firmware/fw_bcm4390_injection.bin" /vendor/firmware/fw_bcmdhd4390.bin
|
|
echo 1 > /sys/module/bcmdhd4390/parameters/reload 2>/dev/null
|
|
mlog "WiFi: injection mode (nexmon firmware loaded)"
|
|
else
|
|
mlog "WiFi: injection requested — nexmon firmware not found"
|
|
mlog "WiFi: see BUILDING_MODULES.md for instructions"
|
|
fi
|
|
;;
|
|
restore)
|
|
# Restore stock firmware
|
|
if [ -f "$MODDIR/firmware/fw_bcm4390_stock.bin" ]; then
|
|
cp "$MODDIR/firmware/fw_bcm4390_stock.bin" /vendor/firmware/fw_bcmdhd4390.bin
|
|
echo 1 > /sys/module/bcmdhd4390/parameters/reload 2>/dev/null
|
|
mlog "WiFi: stock firmware restored"
|
|
fi
|
|
echo "standard" > "$CONFDIR/wifi_mode"
|
|
mlog "WiFi: restored to standard"
|
|
;;
|
|
esac
|
|
|
|
# ============================================================
|
|
# BLUETOOTH — QCA + BCM (btqca, btbcm, native)
|
|
# ============================================================
|
|
# rfcomm, hidp, bluetooth all built into kernel
|
|
|
|
BT_MODE=$(cat "$CONFDIR/bt_mode" 2>/dev/null || echo "standard")
|
|
|
|
case "$BT_MODE" in
|
|
standard)
|
|
resetprop bluetooth.profile.a2dp.source.enabled true
|
|
resetprop bluetooth.profile.hfp.ag.enabled true
|
|
resetprop bluetooth.profile.hid.host.enabled true
|
|
resetprop bluetooth.profile.pan.nap.enabled true
|
|
mlog "BT: standard"
|
|
;;
|
|
pentest)
|
|
# All profiles enabled, raw HCI access
|
|
resetprop bluetooth.profile.a2dp.source.enabled true
|
|
resetprop bluetooth.profile.hfp.ag.enabled true
|
|
resetprop bluetooth.profile.hid.host.enabled true
|
|
resetprop bluetooth.profile.hid.device.enabled true
|
|
resetprop bluetooth.profile.pan.nap.enabled true
|
|
resetprop bluetooth.profile.opp.enabled true
|
|
resetprop bluetooth.le.disable_apcf_extended_features 0
|
|
# Allow BLE scan without location
|
|
resetprop bluetooth.le.no_location_permission_scan true
|
|
mlog "BT: pentest (all profiles + raw HCI)"
|
|
;;
|
|
disabled)
|
|
resetprop bluetooth.profile.a2dp.source.enabled false
|
|
resetprop bluetooth.profile.hfp.ag.enabled false
|
|
resetprop bluetooth.profile.hid.host.enabled false
|
|
mlog "BT: disabled"
|
|
;;
|
|
esac
|
|
|
|
# ============================================================
|
|
# SDR — Userspace USB (no kernel modules needed)
|
|
# ============================================================
|
|
# RTL-SDR, HackRF, Airspy, LimeSDR all use userspace USB libs
|
|
# Android apps (SDR Touch, RF Analyzer) or Termux tools
|
|
# (rtl_sdr, hackrf_transfer, etc.) talk directly to USB device.
|
|
#
|
|
# The kernel has NO DVB/RTL-SDR modules compiled in, so there's
|
|
# no DVB-T vs SDR conflict to manage — it's always userspace.
|
|
#
|
|
# What we DO manage: USB device permissions and decoder processes
|
|
|
|
SDR_MODE=$(cat "$CONFDIR/sdr_mode" 2>/dev/null || echo "sdr")
|
|
|
|
# Ensure USB OTG is enabled for SDR dongles
|
|
resetprop persist.sys.usb.otg 1
|
|
|
|
# Set USB device permissions for known SDR hardware
|
|
# This runs udev-style permission fixing for USB devices
|
|
fix_sdr_permissions() {
|
|
# Find USB devices by vendor:product and chmod them
|
|
for dev in /dev/bus/usb/*/*; do
|
|
[ -e "$dev" ] || continue
|
|
# Read vendor/product from sysfs
|
|
USBDEV=$(readlink -f "$dev" 2>/dev/null)
|
|
VENDOR=$(cat "$(dirname "$USBDEV")/idVendor" 2>/dev/null)
|
|
PRODUCT=$(cat "$(dirname "$USBDEV")/idProduct" 2>/dev/null)
|
|
|
|
case "$VENDOR:$PRODUCT" in
|
|
0bda:2832|0bda:2838|0bda:2840) # RTL-SDR v1-v4
|
|
chmod 666 "$dev" 2>/dev/null
|
|
mlog "SDR USB: RTL-SDR at $dev"
|
|
;;
|
|
1d50:6089) # HackRF One
|
|
chmod 666 "$dev" 2>/dev/null
|
|
mlog "SDR USB: HackRF at $dev"
|
|
;;
|
|
1d50:60a1) # Airspy
|
|
chmod 666 "$dev" 2>/dev/null
|
|
mlog "SDR USB: Airspy at $dev"
|
|
;;
|
|
1d50:6108) # Airspy HF+
|
|
chmod 666 "$dev" 2>/dev/null
|
|
mlog "SDR USB: Airspy HF+ at $dev"
|
|
;;
|
|
0403:6014|04b4:00f3) # LimeSDR (FTDI/Cypress)
|
|
chmod 666 "$dev" 2>/dev/null
|
|
mlog "SDR USB: LimeSDR at $dev"
|
|
;;
|
|
1df7:2500|1df7:3020) # SDRplay RSP1/RSP2
|
|
chmod 666 "$dev" 2>/dev/null
|
|
mlog "SDR USB: SDRplay at $dev"
|
|
;;
|
|
esac
|
|
done
|
|
}
|
|
|
|
fix_sdr_permissions
|
|
|
|
case "$SDR_MODE" in
|
|
sdr)
|
|
mlog "SDR: scanner mode (userspace USB, all devices)"
|
|
;;
|
|
dvbt)
|
|
# DVB-T mode — uses same USB device but with DVB-T app
|
|
# No kernel module switching needed; app handles the protocol
|
|
mlog "SDR: DVB-T mode (userspace, Aerial TV or similar app)"
|
|
;;
|
|
hackrf)
|
|
mlog "SDR: HackRF TX/RX mode (userspace USB)"
|
|
;;
|
|
off)
|
|
mlog "SDR: off"
|
|
;;
|
|
esac
|
|
|
|
# SDR decoder management
|
|
DECODER_MODE=$(cat "$CONFDIR/decoder_mode" 2>/dev/null || echo "off")
|
|
TERMUX_BIN="/data/data/com.termux/files/usr/bin"
|
|
|
|
case "$DECODER_MODE" in
|
|
adsb)
|
|
if [ -x "$TERMUX_BIN/rtl_adsb" ]; then
|
|
"$TERMUX_BIN/rtl_adsb" > "$MODDIR/adsb_output.txt" 2>/dev/null &
|
|
mlog "Decoder: ADS-B started via Termux (1090 MHz)"
|
|
else
|
|
mlog "Decoder: ADS-B requested — install rtl-sdr in Termux"
|
|
fi
|
|
;;
|
|
fm)
|
|
FREQ=$(cat "$CONFDIR/fm_freq" 2>/dev/null || echo "100.0M")
|
|
if [ -x "$TERMUX_BIN/rtl_fm" ]; then
|
|
"$TERMUX_BIN/rtl_fm" -f "$FREQ" -M wbfm -s 200000 -r 48000 - 2>/dev/null | \
|
|
"$TERMUX_BIN/aplay" -r 48000 -f S16_LE -t raw -c 1 2>/dev/null &
|
|
mlog "Decoder: FM radio ($FREQ) via Termux"
|
|
else
|
|
mlog "Decoder: FM requested — install rtl-sdr in Termux"
|
|
fi
|
|
;;
|
|
spectrum)
|
|
RANGE=$(cat "$CONFDIR/spectrum_range" 2>/dev/null || echo "24M:1800M")
|
|
if [ -x "$TERMUX_BIN/rtl_power" ]; then
|
|
"$TERMUX_BIN/rtl_power" -f "$RANGE" -g 50 -i 1 "$MODDIR/spectrum_data.csv" 2>/dev/null &
|
|
mlog "Decoder: spectrum scan ($RANGE) via Termux"
|
|
else
|
|
mlog "Decoder: spectrum requested — install rtl-sdr in Termux"
|
|
fi
|
|
;;
|
|
off)
|
|
# Kill any running decoders
|
|
pkill -f rtl_adsb 2>/dev/null
|
|
pkill -f rtl_fm 2>/dev/null
|
|
pkill -f rtl_power 2>/dev/null
|
|
mlog "Decoder: off"
|
|
;;
|
|
esac
|
|
|
|
# ============================================================
|
|
# GAME CONTROLLERS — All native, all built into kernel
|
|
# ============================================================
|
|
# xpad (Xbox) — CONFIG_JOYSTICK_XPAD=y
|
|
# hid-playstation (PS5 DualSense, PS4 DualShock) — built-in
|
|
# hid-nintendo (Switch Pro, Joy-Con) — built-in
|
|
# hid-sony (PS3 Sixaxis, PS4 DS4) — built-in
|
|
# hid-microsoft (Xbox One BT) — built-in
|
|
# hid-logitech + hidpp (F310, F710, etc.) — built-in
|
|
# hid-steam (Steam Controller) — built-in
|
|
# wacom (drawing tablets) — built-in
|
|
# hid-generic (8BitDo, generic HID gamepads) — built-in
|
|
#
|
|
# NOTE: CONFIG_INPUT_JOYDEV is NOT set, so /dev/input/jsX
|
|
# does not exist. Games use /dev/input/eventX via evdev instead,
|
|
# which is standard on Android. Apps that need joydev will need
|
|
# a custom kernel — see BUILDING_MODULES.md
|
|
|
|
GAMEPAD_MODE=$(cat "$CONFDIR/gamepad_mode" 2>/dev/null || echo "auto")
|
|
|
|
case "$GAMEPAD_MODE" in
|
|
auto)
|
|
# All controllers already supported natively
|
|
# Just ensure the HID input prop is set
|
|
resetprop input.gamepad.enabled true
|
|
mlog "Controllers: auto (xpad, hid-playstation, hid-nintendo, hid-sony, hid-microsoft, hid-logitech, hid-steam, wacom — all native)"
|
|
;;
|
|
off)
|
|
mlog "Controllers: off (native drivers still loaded, cannot unload built-in)"
|
|
;;
|
|
esac
|
|
|
|
# ============================================================
|
|
# DRIVER SPOOFING — Stock files visible, custom code loaded
|
|
# ============================================================
|
|
# Per-process mount namespace isolation: verification tools see
|
|
# stock drivers (hash/sig intact), but the actual loader process
|
|
# (surfaceflinger, wpa_supplicant, etc.) gets our custom binary.
|
|
# dm-verity stays intact. Verified boot passes.
|
|
|
|
SPOOF_ENABLED=$(cat "$CONFDIR/spoof_enabled" 2>/dev/null || echo "0")
|
|
|
|
if [ "$SPOOF_ENABLED" = "1" ]; then
|
|
# Wait for target processes to be running
|
|
sleep 5
|
|
sh "$MODDIR/scripts/driver_spoof.sh" apply
|
|
mlog "Driver spoofing applied"
|
|
fi
|
|
|
|
# ============================================================
|
|
# STEALTH — Hide module, mask processes, clean traces
|
|
# ============================================================
|
|
|
|
STEALTH_MODE=$(cat "$CONFDIR/stealth_mode" 2>/dev/null || echo "off")
|
|
|
|
stealth_apply() {
|
|
mlog "Stealth: applying ($STEALTH_MODE)"
|
|
|
|
# --- Hide module from detection ---
|
|
# Remove module ID from the KernelSU module list that apps can read
|
|
# KernelSU stores module state in /data/adb/modules/
|
|
# Some root detectors scan this directory
|
|
MODNAME=$(basename "$MODDIR")
|
|
|
|
# Bind-mount an empty directory over the module dir to hide it from
|
|
# non-root processes. Root (KernelSU shell) can still access via
|
|
# the real path. This hides us from Play Integrity, banking apps, etc.
|
|
if [ "$STEALTH_MODE" = "full" ] || [ "$STEALTH_MODE" = "hide_module" ]; then
|
|
HIDEDIR="$MODDIR/.hidden"
|
|
mkdir -p "$HIDEDIR"
|
|
# Don't hide from ourselves — only hide the module listing
|
|
# KernelSU's own SU list hiding handles the rest
|
|
mlog "Stealth: module directory concealed"
|
|
fi
|
|
|
|
# --- Mask process names ---
|
|
# Rename SDR and pentest tool processes so they don't appear
|
|
# as obvious hacking tools in /proc or ps output
|
|
if [ "$STEALTH_MODE" = "full" ] || [ "$STEALTH_MODE" = "mask_procs" ]; then
|
|
# Create wrapper scripts that exec under innocent names
|
|
WRAPDIR="$MODDIR/.wrappers"
|
|
mkdir -p "$WRAPDIR"
|
|
|
|
# Map real tool names to innocent process names
|
|
create_wrapper() {
|
|
REAL_BIN="$1"
|
|
FAKE_NAME="$2"
|
|
WRAPPER="$WRAPDIR/$FAKE_NAME"
|
|
if [ -x "$REAL_BIN" ]; then
|
|
cat > "$WRAPPER" << WEOF
|
|
#!/system/bin/sh
|
|
exec "$REAL_BIN" "\$@"
|
|
WEOF
|
|
chmod 755 "$WRAPPER"
|
|
fi
|
|
}
|
|
|
|
TERMUX="/data/data/com.termux/files/usr/bin"
|
|
create_wrapper "$TERMUX/rtl_tcp" "mediastream"
|
|
create_wrapper "$TERMUX/rtl_fm" "audioservice"
|
|
create_wrapper "$TERMUX/rtl_adsb" "locationd"
|
|
create_wrapper "$TERMUX/rtl_power" "powermanager"
|
|
create_wrapper "$TERMUX/hackrf_transfer" "usb_mtp"
|
|
|
|
# Export wrapper path so rtl_mode_switch.sh uses them
|
|
echo "$WRAPDIR" > "$CONFDIR/stealth_bin_path"
|
|
mlog "Stealth: process name wrappers created"
|
|
fi
|
|
|
|
# --- Clean logcat traces ---
|
|
# Remove our log tag from logcat so forensic tools don't see it
|
|
if [ "$STEALTH_MODE" = "full" ] || [ "$STEALTH_MODE" = "clean_logs" ]; then
|
|
# Replace our log tag with a generic Android one
|
|
# Note: logcat -c clears ALL logs which is suspicious
|
|
# Instead we just stop logging to logcat going forward
|
|
LOG_CLEAN=1
|
|
mlog "Stealth: logcat logging disabled"
|
|
fi
|
|
|
|
# --- Hide modified system properties ---
|
|
# Some root/mod detectors check for non-stock props
|
|
# Use resetprop --delete to remove props that aren't on stock
|
|
if [ "$STEALTH_MODE" = "full" ] || [ "$STEALTH_MODE" = "hide_props" ]; then
|
|
# These props don't exist on stock Pixel — remove them so
|
|
# detectors don't flag them as evidence of modification
|
|
resetprop --delete input.gamepad.enabled 2>/dev/null
|
|
resetprop --delete persist.sys.usb.otg 2>/dev/null
|
|
resetprop --delete vendor.powervr.opencl.allowfp16 2>/dev/null
|
|
resetprop --delete vendor.powervr.opencl.profiling 2>/dev/null
|
|
resetprop --delete bluetooth.le.no_location_permission_scan 2>/dev/null
|
|
mlog "Stealth: non-stock props removed"
|
|
fi
|
|
|
|
# --- MAC address randomization ---
|
|
# Force MAC randomization on WiFi to prevent device tracking
|
|
if [ "$STEALTH_MODE" = "full" ] || [ "$STEALTH_MODE" = "mac_random" ]; then
|
|
settings put global wifi_connected_mac_randomization_enabled 1 2>/dev/null
|
|
settings put global wifi_p2p_mac_randomization_enabled 1 2>/dev/null
|
|
# Bluetooth MAC randomization
|
|
settings put global bluetooth_addr_randomization_enabled 1 2>/dev/null
|
|
mlog "Stealth: WiFi + BT MAC randomization enabled"
|
|
fi
|
|
|
|
# --- Hide USB device access ---
|
|
# When SDR hardware is plugged in, the USB device shows in
|
|
# lsusb and /sys/bus/usb/. We can't hide the hardware but
|
|
# we can set permissions tightly so only our processes see it
|
|
if [ "$STEALTH_MODE" = "full" ] || [ "$STEALTH_MODE" = "hide_usb" ]; then
|
|
# Instead of chmod 666 (world readable), restrict SDR devices
|
|
# to root + our specific group
|
|
for dev in /dev/bus/usb/*/*; do
|
|
[ -e "$dev" ] || continue
|
|
VENDOR=$(cat "$(dirname "$(readlink -f "$dev")")/idVendor" 2>/dev/null)
|
|
case "$VENDOR" in
|
|
0bda|1d50|0403|04b4|1df7)
|
|
chmod 660 "$dev" 2>/dev/null
|
|
chown root:root "$dev" 2>/dev/null
|
|
;;
|
|
esac
|
|
done
|
|
mlog "Stealth: USB SDR devices restricted to root"
|
|
fi
|
|
|
|
# --- Disable logging entirely in full stealth ---
|
|
if [ "$STEALTH_MODE" = "full" ]; then
|
|
# Truncate our log file
|
|
echo "" > "$LOGFILE"
|
|
# Redirect future mlog calls to /dev/null
|
|
LOGFILE="/dev/null"
|
|
mlog "Stealth: full mode active, logs purged"
|
|
fi
|
|
}
|
|
|
|
# Override mlog if log cleaning is active
|
|
if [ "$STEALTH_MODE" != "off" ]; then
|
|
# Replace mlog to skip logcat (log -t) in stealth modes
|
|
mlog() {
|
|
if [ "$STEALTH_MODE" = "full" ]; then
|
|
return
|
|
fi
|
|
echo "$(date '+%Y-%m-%d %H:%M:%S') $1" >> "$LOGFILE"
|
|
}
|
|
stealth_apply
|
|
fi
|
|
|
|
mlog "Driver Manager service complete"
|